Maintenance of the three-dimensional welding platform in winter

Maintenance of the three-dimensional welding platform in winter is an important measure to ensure its long-term stable operation and high precision. Here are some specific maintenance suggestions:

1. Insulation and antifreeze

Equipment insulation: In winter, in order to prevent the three-dimensional welding platform from being affected by the low ambient temperature, it should be insulated. Insulation materials such as insulation cotton and foam plastics can be used to wrap the key parts of the platform to reduce heat loss.

Drainage antifreeze: Ensure that the drainage system inside the platform is unobstructed to prevent the accumulated water from freezing at low temperatures, causing the platform to deform or damage. In cold weather, the drain can be checked regularly to ensure that there is no freezing.

2. Cleaning and rust prevention

Regular cleaning: Use a soft cloth to wipe the surface of the platform, remove impurities such as iron filings and oil stains, and keep the surface of the platform clean and dust-free. This helps reduce wear and corrosion and extend the service life of the platform.

Rust prevention: Apply an appropriate amount of anti-rust oil on the surface of the platform to prevent the platform from rusting. For platforms that are not used for a long time, a thicker anti-rust oil should be applied and covered with protective paper for sealing.

3. Use and Maintenance

Handle with care: When placing the workpiece on the platform, it should be handled with care to avoid bumps and scratches on the surface of the platform. This helps maintain the accuracy and finish of the platform.

Uniform force: Ensure that the workpiece is evenly distributed on the platform to avoid excessive local force causing deformation of the platform. Pay special attention to this when placing heavy objects.

Avoid long-term heavy pressure: After the workpiece is inspected or marked, the workpiece should be removed from the platform in time to avoid long-term heavy pressure causing deformation of the platform.

4. Regular inspection and calibration

Check the connection part: Regularly check whether the connection part and screws of the platform are loose. If there is any looseness, tighten it in time. This helps to ensure the stability and accuracy of the platform.

Accuracy check: Regularly check the accuracy of the platform to ensure that key indicators such as the flatness and verticality of the platform meet the use requirements. If the accuracy is found to be reduced, calibration or maintenance should be carried out in time.

5. Storage and transportation

Storage environment: The platform should be stored in a ventilated and dry environment, away from heat sources, corrosive gases and liquids. This helps to maintain the performance and accuracy of the platform.

Transportation precautions: During transportation, four steel wire ropes of the same length should be used to hang the four lifting holes of the platform at the same time to ensure that the platform is hoisted smoothly and avoid deformation. At the same time, care should be taken to avoid impact and vibration during transportation.

In summary, the maintenance of the three-dimensional welding platform in winter requires comprehensive consideration of insulation, cleaning, use and maintenance, regular inspection and calibration, storage and transportation, etc. By taking effective maintenance measures, it can ensure that the platform maintains high precision and stability in winter, providing strong support for production and work.