How to maintain the grantie table
The daily maintenance of the marble platform is the key to ensure its accuracy and extend its service life. Here are some key daily maintenance steps and considerations:
1, cleaning and maintenance
Regular cleaning:
Wipe with a slightly damp cloth with mild detergent and use as little water as possible when cleaning. This can effectively remove stains and impurities on the surface of the platform, while avoiding excessive moisture causing the marble to be damp.
After cleaning, dry and polish the platform surface with a clean soft cloth to maintain its finish.
Avoid using highly corrosive cleaners:
Cleaning agent should choose mild and non-corrosive products, such as 75% ethanol medical alcohol, avoid the use of strongly corrosive liquid as detergent, to prevent damage to the marble platform surface.
2. Prevent damage
Handle and release parts lightly:
The workpiece should be slowly and smoothly placed on the marble platform to avoid hitting the surface of the platform, causing deformation or damage.
The weight of the workpiece should not exceed the rated load of the platform to prevent damage to the platform due to overload.
Avoid hard objects:
Pay attention to prevent heavy objects such as iron from hitting the marble platform working surface, so as to avoid pits or scratches, reduce the quality of the platform and affect the use of it.
3, temperature control
Temperature adaptability:
Place the workpiece to be measured and related measurement tools on the platform for a period of time (such as 35 minutes) to make them consistent with the temperature of the platform to reduce measurement errors due to temperature differences.
Avoid placing the marble platform in the sun or near a heat source to prevent heat deformation and loss of precision.
4. Storage and protection
Storage environment:
The marble platform should be placed in a low noise, less dust, no vibration, stable temperature, dry and ventilated environment. Such an environment helps protect the platform from damage caused by external factors.
Anti-rust treatment:
When not used for a long time, a layer of anti-rust oil should be coated on the surface of the platform and all steel surfaces, and covered with anti-rust paper or special packaging materials to prevent rust and damage.
5. Regular inspection and repair
Regular inspection:
Regular inspection of the marble platform, including surface smoothness, whether there are pits or scratches. When problems are found, they should be dealt with promptly.
Professional Repair:
For slightly bruised or worn marble platforms, professional technicians can be asked to deal with it to restore its original accuracy and performance.
When it is found that the surface of the platform is uneven, burrs, rust spots, inaccurate scale, bending deformation and other problems, it should not be dismantled or repaired by rough methods, but should be sent to the measuring station for maintenance and accuracy verification.
6, use precautions
Avoid debris accumulation on the platform:
In the process of use, do not stack the marble platform with tools, workpieces, etc., so as not to hurt the platform.
Proper use of the platform:
Marble platform is a precision measuring tool, can not be used as a substitute for other items. For example, you can’t use a vernier caliper to mark the platform, you can’t use a percentage ruler as a small hammer, etc.
Avoid platform vibration:
Do not put the marble platform on the machine tool at will, so as not to damage the platform due to the vibration of the machine tool.
In summary, the daily maintenance of the marble platform involves many aspects such as cleaning and maintenance, damage prevention, temperature control, storage and protection, regular inspection and repair, and precautions for use. Through scientific and reasonable maintenance measures and management methods, we can ensure that the marble platform maintains high precision and good performance for a long time.